Husqvarna TE 250 Workshop Manual page 92

GENERAL OPERATIONS
SMR 450-R: use an 8 mm T-wrench and a 10 mm T-wrench inside to remove
the fastening screw (1) of silencers (3) and (4). Remove the spring (2) and ex-
3
tract silencers (3) and (4).
1
1
3
4
4
2
2
On the left side disconnect the electric connections from the starting motor [use
an 8 mm wrench to remove the earth cable (5) and a 10 mm wrench for the nut
5
under the rubber cap (6)], remove the clamps (A) that hold the clutch pipe and
the alternator cable.
6
A
E.18 Part. N. 8000 B0148 (02-2008)