Husqvarna TE 250 Workshop Manual page 319

ELECTRIC SYSTEM, DIGITAL INSTRUMENT
6- SPEED / AVS 1 / RPM (figure 6)
- SPEED: motorcycle speedmaximum value: 299 kmh or 299 mph;
- AVS 1: shows the covered average speed of the motorcycle,
according with a distance (TRIP 1) and a miles/kilometers covered time (STP 1)
(the data will be lost after battery detachment).
If the STP 1 will be set to zero, the TRIP 1 and AVS 1 functions will be set
to zero too.
- RPM: engine r.p.m. shown on the vertical LED indicator.
A
7- SPEED / V MAX / RPM (figure 7)
- SPEED: motorcycle speedmaximum value: 299 kmh or 299 mph;
- V MAX: shows the motorcycle MAXIMUM speed (reached MAX speed), kmh or
mph. Maximum value: 299 kmh or 299 mph.
To set to zero V MAX, push the knob SCROLL (A) for more than 3 seconds;
- RPM: engine r.p.m. shown on the vertical LED indicator.
8- SPEED / TRIP 2 / RPM (figure 8)
- SPEED: motorcycle speedmaximum value: 299 kmh or 299 mph;
- TRIP 2: distance- maximum value: 999, 9 km / miles (the data will be lost after
battery
detachment).
To set to zero TRIP 2, push the knob SCROLL (A) for more than 3 seconds;
- RPM: engine r.p.m. shown on the vertical LED indicator.
9- TRP 2 / CLOCK / RPM (figure 9)
- TRIP 2: distance- Max value: 999.9 km / miles (the data will be lost after battery
detachment). To set to zero TRIP 2, push the knob SCROLL (A) for more than 3
seconds;
- CLOCK: clock- Reading from 0:00 to 23:59:59 (the data will be lost after battery
detachment). To reset the clock, push the knob SCROLL (A) for more than 3
seconds in order to increase the hours; release the knob then, after 3 seconds,
it is possible to
increase the minutes;
- RPM: engine r.p.m. shown on the vertical LED indicator.
Part. N. 8000 B0148 (02-2008) M.39