Connecting To The Internet Manually - Siemens GIGASET SX762 WLAN DSL Manual

The user interface
The configuration program comprises the following functions:
Basic Setup Wizard
Security Setup Wizard
Advanced Settings
Status

Connecting to the Internet manually

Once you have configured your Internet access (see page 35 and page 50), the Internet
connection is established permanently. If neccessary, you can disconnect the connec-
tion and re-establish it manually on the start screen.
To establish or end an Internet connection manually:
ì
Open the start screen of the Gigaset SX762 WLAN dsl as described on page 30.
If you have already started the user interface, click the start screen tab at the top left
of the window.
If you have not yet started the user interface, do so now and log on.
ì
Click Connect to establish a connection to the Internet.
ì
Click Disconnect if you no longer need the connection.
32
Use this wizard to make the settings required for connecting
to the Internet and to set up the data for Internet telephony.
This is described from page 34.
This wizard allows you to take security precautions against
unauthorised access to the Gigaset SX762 WLAN dsl and the
local network. You can assign a password and set up encryp-
tion for wireless traffic. This is described from page 38. To
protect your network, we strongly recommend that you
carry out this setup.
Additional functions are offered in the Advanced Settings
menu. You can configure your PABX for fixed network /
Internet telephony, back up and restore the configuration
data, set up the Gigaset SX762 WLAN dsl as a virtual server
for the network and much more. These configuration steps
are optional and can be carried out at a later stage. This is
described from page 47.
You can view information about the configuration and sta-
tus of the Gigaset SX762 WLAN dsl in the Status menu. This
is described from page 101.