Telephony - Siemens GIGASET SX762 WLAN DSL Manual

Basic Setup Wizard
In the case that you are not provided with the NAT service you have to enter the fol-
lowing additional data:
– In the Router IP address field enter the
WLAN dsl as given by your service provider.
– In the Subnet mask field enter the given
ì
If you have entered all data, click Test Settings to check the Internet connection.
An attempt is made to set up an Internet connection. The result is shown in a window.
If the connection could be set up successfully, the Close button appears.
ì
Click the Close button to return to the Basic Setup Wizard.
ì
Click Next >.

Telephony

You will find the access data you require for configuring Internet telephony (VoIP) in the
documentation you received from your service provider.
ì
Select the option On for VoIP account if you wish to use Internet telephony (default
setting).
ì
Select your service provider from the Service provider selection menu. If your pro-
vider is not listed, you can use the Other option.
ì
Enter the data you have been given by your service provider for SIP User name and
SIP Password. Enter the password again to confirm it.
ì
Pressing Show Additional Settings will show additional VoIP settings as shown on
the VoIP settings page in the Advanced Settings (see page 78).
ì
If you wish to delete the entered data, click the Clear button.
36
Public IP address of your Gigaset SX762
Subnet mask.