Siemens GIGASET SX762 WLAN DSL Manual page 53

– In the Subnet mask field enter the given
ì
Click Test Settings to check the settings.
An attempt is made to set up an Internet connection. The result is shown in a sepa-
rate window.
ì
Click the Close button, which is shown if the test was successful.
ì
Click OK to apply the settings.
Note:
If you have selected Non NAT service during the Internet connection configuration
no IP address translation takes place as described in section "Setting up the NAT func-
tion" on page 57. In this case a PC which you want to provide Internet services (e.g.
Web or FTP service) is accessed from the Internet via its own IP address. You may have
to change the network settings of the PC so that the IP address is in line with the
router's IP address and subnet mask. For detailed information how to do this, refer to
the document entitled "Configuring the local area network" on the CD-ROM. Addition-
ally, you should install a firewall software on the PCs, e.g. by using the Windows oper-
ating system resources.
Configuring Advanced Settings
Subnet mask.
51