Call Waiting And Call Reject If Busy; Special Functions; Confirmation Tones - Siemens GIGASET SX762 WLAN DSL Manual

Call waiting and call reject if busy

*43#
#43#
*26#
#26#
Notes:
If you additionally enter *# in each case before the key combination shown in the
u
table, the settings will be forwarded directly to the exchange and will be activated
there.
The phone numbers of waiting calls are not displayed even if the caller permits
u
this.

Special functions

Key combination
*52#
#52#

Confirmation tones

If you activate a service attribute, for example set up call forwarding, you will hear a pos-
itive confirmation tone if successful and a negative confirmation tone if unsuccessful.
Positive confirmation tone
Negative confirmation tone
Allow call waiting
Delete call waiting
Reject all calls
Delete the reject calls
setting
Effect
Enable
WLAN function
Disable
WLAN function
Ascending tone sequence at 6-second intervals
Regular sequence of short low-frequency tones
Use the key combination *43# to
allow call waiting when the line is
busy.
Dial #43# to disable call waiting if
busy again.
Use the key combination *26# to
specify that all calls are to be rejected.
This is only possible if call waiting is
disabled.
Use the key combination #26# to
delete the reject all calls setting.
Description
This shortcut key allows the WLAN
function of your Gigaset SX762 WLAN
dsl to be enabled without you having
to open the configuration program.
This shortcut key allows the WLAN
function of your Gigaset SX762 WLAN
dsl to be disabled again.
Call guide
93