Siemens GIGASET SX762 WLAN DSL Manual page 51

ì
Select the appropriate option to activate or deactivate the Internet function of the
Gigaset SX762 WLAN dsl.
ì
Choose the desired Connection type for your Internet connection:
– Choose the ADSL if you are using the integrated ADSL modem of the Gigaset
SX762 WLAN dsl.
– Choose Ethernet if you are setting up the connection to the Internet via an Eth-
ernet network connection (e.g. if you are using an external modem with an Eth-
ernet connection).
If you change the connection type, you must also modify your Internet access set-
tings accordingly (page 50).
Configure multiple connection services
Your Internet service provider can permit you to set up a number of Connection serv-
ices. You can set up these services here. You can configure rules for using these services
under the Routing option (page 62).
ì
Select the appropriate option to activate or deactivate Configure multiple connec-
tion services.
If you have already configured an Internet connection (e.g. in the Basic Setup Wizard),
this is shown as Connection service selected to edit. This is then also displayed on
other pages of the Internet menu.
ì
For an ADSL connection, make the following settings:
– Enter the values for VPI / VCI for each connection service that you have received
from your Internet service provider.
– Enter a description to identify the respective connection service.
– Click Add to create a new entry.
– Click Delete to delete an entry.
– Click OK to save and apply the changes.
ì
For an Ethernet connection, make the following settings:
– Enter the values for VLAN tag for each connection service that you have received
from your Internet service provider.
– Choose the desired Priority for each connection service in comparison with the
other connection services.
– You can choose between 0 and 7 for the Priority, whereby 0 is the highest priority.
– Click Add to create a new entry.
– Click Delete to delete an entry.
– Click OK to save and apply the changes.
Configuring Advanced Settings
49