Finishing The Basic Setup Wizard - Siemens GIGASET SX762 WLAN DSL Manual

ì
Confirm your selection with Next >.

Finishing the Basic Setup Wizard

The basic settings now are completed. You can change your settings before saving it, if
required.
ì
If you want to change the settings, click < Back.
ì
If you want to confirm the settings, click Finish to close the Basic Setup Wizard.
The Gigaset SX762 WLAN dsl is now configured and ready to connect to the Internet.
The Security Setup Wizard then opens automatically. We strongly recommend using
the Security Setup Wizard to protect your Gigaset SX762 WLAN dsl against attacks. If you
want to carry this out at a later stage, deactivate I would like to run the Security Setup
Wizard now.
If you have selected Non NAT service during the Internet connection configuration (see
page 35) no IP address translation takes place as described in section "Setting up the
NAT function" on page 57. In this case a PC which you want to provide Internet services
(e.g. Web or FTP service) is accessed from the Internet via its own IP address. You may
have to change the network settings of the PC so that the IP address is in line with the
router's IP address and subnet mask. For detailed information how to do this, refer to
the document entitled "Configuring the local area network" on the CD-ROM.
Basic Setup Wizard
37