System Password - Siemens GIGASET SX762 WLAN DSL Manual

Administration

System Password

You can assign a System Password to the Gigaset SX762 WLAN dsl user interface and
specify the period after which a session is to be automatically ended if no further entry
is made.
ì
In the Advanced Settings – Administration menu, select System Password.
After installation, the Gigaset SX762 WLAN dsl user interface is protected by the
System Password admin. To prevent unauthorised changes being made to the configu-
ration, you should set a new System Password from time to time. You may already have
set a System Password when you set up the Security Setup Wizard. If so, you can
change it here.
ì
Enter the old System Password in the Current password field.
ì
Enter a new system password in the New password field and repeat it in the
Confirm new password field.
The System Password may contain up to 20 characters. The System Password is case
sensitive. Avoid proper names and all too obvious words. Use a combination of letters,
digits and special characters.
Note
If you forget your System Password, you have to reset the Gigaset SX762 WLAN dsl
(page 20). This returns all your settings to the factory configuration. This means the
system password is changed back to admin.
Idle time before log off setting:
ì
Enter the number of minutes after which the configuration program is to be ended
if no further entry is made. The default is 10 minutes. If you enter 0, the program
will never be ended automatically.
ì
Click OK to apply the settings.
96