Toshiba TDP-SW20 Service Manual page 109

6.Optical engine
Step Figure
11
DMD chip
12
DMD socket
13
14
15
Attention)
(Remove the dust from DMD and feld lens by applying air presurs,
(Wipe DMD terminal side by cling Alcohol to prevent bad contact.
(The removed heat conduction sheet is not used again.
Composition parts for DMD chip attachment .
These assigned as spare parts.
DMD Board
heat conduction sheet
[DMD block assembly]
DMD chip and a DMD socket are coalesced.
Coalesced the DMD chip and the DMD socket a put
on an engine frame.
DMD Board is pilled up.
Explanation
Attention)
In replacement of DMD, it takes
measures against static electricity,
such as a list strap.
109