Electrical Adjustment - Toshiba TDP-SW20 Service Manual

ELECTRICAL ADJUSTMENT

1. Preparation
<Test equipment and JIG>
1) Personal computer
(Windows PC, OS: Windows 98SE, ME, 2000, XP)
2) Signal generating software
SINGOWS2000.exe and S20_V_Ramp.bmp
3) JIG for Y/Pb/Pr Input (Fig.1)
4) Cables
RGB Cable
Conversion cable (for Y/Pb/Pr Input: Fig.2)
Fig.2
5) Memory PC Card (TDP-SW20 Only)
Copy the following files into memory pc card.
XGA_16_255.jpg and XGA_240_255.jpg
<For connection and setting of Personal computer>
1) Connection of personal computer
Connect the PC to computer 1 input as shown in following Fig.3
Set RGB output of the PC to CRT.
SN: 23368760
Fig.3
Fig.1
SN: 23587154
Connect the Green Pin to JIG.
17