Click the SINGOWS2000 of taskbar and select full-white (raster) signal.
Right - click to display the following color pallets.
Click the black button.
Move the mouse cursor out of a screen
to avoid the error.
When you adjust Y/Pb/Pr, connect RGB output of [SINGOWS2000] to the JIG.
The signal from RCA pin through the JIG is input the computer 1 of the projector
by green signal pin of the conversion cable.
[SINGOWS2000] should be input through the JIG.
Refer to Fig.1 and Fig.2
When the signal is properly connected, the input mode changes to Y/Pb/Pr.
29