LG LRN8640N User Manual page 30

After the preceding operations are performed, the camera
is added to the camera list of the LRN8640N. Then, move
your cursor to the left edge of the main screen and drag
the camera to a view window to monitor the corresponding
site.
Editing Cameras
To change the network settings of camera:
1. Choose Main Menu > Device;
2. Select the camera and double click> Device Setting>
Network;
3. Change the input value and click "Save".
4. Choose Main Menu > Device and select the camera;
5. Click Change Sequence;
6. In the displayed dialog box, enter a digit in the text
box, as shown in the following figure.
7. Click OK.
Deleting Cameras
29
To delete a camera:
1. Choose Main Menu > Device.
2. In the Device dialog box, select the camera from the
camera list and click Remove.
PTZ Controls
When you are monitoring a site, you can use PTZ controls
to look around your surveillance site.
Common PTZ Controls
Common PTZ controls are described as follows:
Option Description
Zooming
Click
zoom out.
Only this option is available to
ONVIF cameras.
Adjusting the
Click
Brightness
decrease the display brightness,
respectively.
Adjusting the Focus
Click
focus, respectively.
Click
Camera Control
Click
Menu
show, enter, and exit the camera
control menu, respectively.
These buttons apply only to
specific cameras.
Turning on or off the
Click
Backlight
off the backlight, respectively.
Day and Night Mode
Click
disable the day and night mode,
respectively.
Click
automatic day and night mode.
Wide dynamic range
Click
(WDR)
disable the WDR technique,
respectively.
Monitoring a Site
to zoom in and to
or to increase or
or for near or far
for autofocus.
, , and to
or to turn on or
or to enable or
to enable the
or to enable or