LG LRN8640N User Manual page 32

3. Select cameras for the touring scheme. These cameras
are to be toured.
4. Enter a dwell time for cameras.
You can enter either a unique dwell time for each
camera or a unified dwell time for several cameras.
To enter a unique dwell time for a camera, select the
camera and select a time length from the Unified
Dwell Time drop-down list, as shown in the following
figure.
To enter a unified dwell time for several cameras:
1) Select these cameras.
2) Click Unified Dwell Time and select a time length
31
from the Unified Dwell Time drop-down list.
The following is an example.
5. (Optional) Change the order for each camera using
the Up and Down buttons.
6. (Optional) Click Rename to rename the current
touring scheme.
The following is an example.
7. Click Start and then Back.
After the preceding steps are performed, live videos from
these surveillance sites are toured on the view window.
To tour multiple surveillance sites on a secondary screen:
1. Right-click a view window and choose Advanced >
Tour Camera on Secondary Screen > HDMI2 or VGA.
If you already connect two monitors to the LRN8640N
but you cannot find the HDMI2 and VGA options,
check whether the current screen layout is for two or
three screens, for example
If yes, select a screen layout for a single screen,

Monitoring a Site
or .