LG LRN8640N User Manual page 33

for example
If not, contact us.

2. In the displayed dialog box, select a touring scheme.
By default, the Channel Poll1 scheme is selected, as
shown in the following figures.
3. Select cameras for the touring scheme. These cameras
are to be toured.
4. Enter a dwell time for cameras.
You can enter either a unique dwell time for a camera
or a unified dwell time for several cameras.
5. (Optional) Change the order for each camera using
the Move Up and Move Down buttons.
6. (Optional) Click Rename to rename the current
touring scheme.
7. Click Start and then Back.
Setting and Touring Screen Layouts
When multiple view windows are displayed on the main
screen, you can set the screen layout, create a screen layout
scheme with cameras bound to view windows, and tour
screen layout schemes.
To set the screen layout:
1. Right-click a view window and choose Screen Layout.
2. Choose a layout or click More.
Then, you will see the following.
32
.
You can also set the screen layout for secondary
screens in this dialog box.
To create a screen layout scheme with cameras bound to
view windows:
1. Determine a screen layout by performing the previous
two steps.
2. Bind cameras and view windows.
1) Right-click a view window and choose Select
Camera.
2) Click the target camera.
Alternatively, click More to find the target camera,
as shown in the following figure.
You can also click Search for New Camera to
search for and add a new camera. For operation
details, see section "Adding Cameras."
3. Right-click a view window and choose Layout Scheme.
4. In the displayed dialog box, click Obtain the Current
Layout, as shown in the following figure.
Monitoring a Site