How To Reset; Fault History - ABB ACSM1 Manual

304

How to reset

The drive can be reset either by pressing the reset key on the PC tool (
panel (RESET) or switching the supply voltage off for a while. When the fault has
been removed, the motor can be restarted.
A fault can also be reset from an external source by parameter
SEL.

Fault history

When a fault is detected, it is stored in the fault logger with a time stamp. The fault
history stores information on the 16 latest faults of the drive. Three of the latest faults
are stored at the beginning of a power switch off.
Signals
recent faults.
Alarms can be monitored via bit words
LOGGER 6
is lost at power switch off or fault reset.
Fault tracing
8.01 ACTIVE FAULT
and 8.15 ALARM WORD 1...8.18 ALARM WORD
and 8.02 LAST FAULT
8.05 ALARM LOGGER 1...8.10 ALARM
10.08 FAULT RESET
store the fault codes of the most
4. Alarm information
) or control