NEC Promise SuperTrak EX8350 User Manual page 20

20
Ports 1 to 8
1
These channels allow the card to be connected to SATA devices. Port numbers 1 to 8 are available on this
controller (depending on the server).
HW label
2
Indicates the management revision of the card.
Additional battery connector
3
The connector allows the card to be connected to an additional battery.
I2C connector
4
The connector is connected with an I2C cable.
HDD LED connector
6
The connector allows the card to be connected to the motherboard in the server in order to light the DISC
ACCESS lamp on the server.
PCI connector (PCI Express supported)
7
The connector allows the card to be connected to a PCI slot (or PCI Express slot) in the server.
Port 1 Port 2 Port 3 Port 4
Port 5 Port 6 Port 7 Port 8
REV
XXX