Installing Additional Hdd Cage; Connecting I2C Cable - NEC Promise SuperTrak EX8350 User Manual

25

5-5. Installing Additional HDD Cage

To install an additional HDD cage in the server, see the procedure described in the User's Guide coming with
the additional HDD cage.

5-6. Connecting I2C Cable

To use the additional HDD cage, connect the card to the cage through the I2C cable coming with the card.
Connect the 3-pin connector (white) of the I2C cable to the I2C connector on the card and the 4-pin
connector (black) to the backplane of the server or the additional HDD cage. For the mating connector on the
additional HDD card or the server, refer to the User's Guide of the additional HDD cage or the server.
I2C connector
To additional HDD cage
3-pin connector (white)
I2C cable