Panasonic KX-TDA100 Features Manual page 103

[Programming Procedures]
1.
ARS Mode 1 Assignment (
If "Automatic access" is selected, ARS operates when an extension user makes a call
using any of the Idle Trunk Access methods.
If "Any method" is selected, ARS operates when an extension user makes a call using
any Trunk Access method.
2.
Leading Digit Exception Table
Store the telephone numbers that will avoid using the ARS feature.
2
ARS Leading Digit Exception Table
Location
No.
001 033555
002 06456
:
: ARS Exception Number
*1
3.
Leading Digit Table
Store the area codes and/or telephone numbers as leading digits that will be routed by
the ARS feature. In this table, the Routing Plan (refer to "4. Routing Plan Table
Assignment") is selected for each number.
The additional number of digits must be assigned only when "#", for example, is needed
after a dialled number. The "#" is added after the assigned number of digits of dialled
number (excluding a leading digit).
3
ARS Leading Digit Table
Location Leading
No. Digits
0001
0002
0003
:
: ARS Leading Digits
*1
: ARS Routing Plan Number
*2
If a dialled number matches a leading digit, the number will be modified according to the
corresponding Routing Plan Table and the modified number will be sent to the trunk when
the assigned additional number of digits are dialled or the Inter-digit time expires.
If a dialled number matches multiple leading digits entries, the leading digit entry with the
lowest numbered location will have priority.
ARS Mode)
2 Assignment
Leading Digit
*1
Exception
:
3 Assignment
Additional
*1
No. of Digits
039 7
0
03
0444 5
: :
1.8 Automatic Route Selection (ARS) Features
Routing Plan
*2
Table No.
1
4
5
:
4
Feature Guide 103