Panasonic KX-TDA100 Features Manual page 360

3.2 PC Programming
Parameter
Basic
Extension Group
Assignment
Group Name
COS
Ring Pattern
Intercept
Extension Intercept Destination
Day
Lunch
Break
Night
Option 1
Mailbox Access ID
Transfer and Recall
Destination
CLIP/COLP Number
Assignment
Call Waiting for direct
extension calls
Call Waiting from
Trunk & Incoming
group
Call Pickup Set
Hot Line
Data Mode
360 Feature Guide
Description
Specifies the extension group.
Refers to the group name. (Display only)
Specifies the COS.
Specifies the ringing pattern table for
incoming calls.
In Day mode.
In Lunch mode.
In Break mode.
In Night mode.
Specifies the codes required to access the
VM service.
Specifies the Transfer and Recall
destination.
Specifies the CLIP/COLP number used for
the extension.
Specifies the Call Waiting mode for direct
extension calls.
Assigns whether Call Waiting from Trunk &
Incoming group is On or Off.
Assigns whether Call Pickup is On or Off.
Specifies the telephone number for Hot
Line.
Assigns whether Data Line Security mode
is enabled.
Value Range
PBX1:1–32/
PBX2:33–64/
PBX3:65–96/
PBX4:97–128
Max. 20 characters
1–64
1–8
Max. 32 digits including
, # and PF
Max. 16 digits including
and #
Extension Number/
Blank(=Your own
extension number)
Max. 16 digits
Off/Call Waiting/
OHCA/
Whisper-OHCA
On/Off
On/Off
Max. 32 digits including
, # and PF
On/Off