System Configuration-Hardware; Extension Port Configuration - Panasonic KX-TDA100 Features Manual

2.1 System Configuration—Hardware
2.1 System Configuration—Hardware

2.1.1 Extension Port Configuration

Description
There are three types of extension ports as follows:
a)
b)
c)
EXtra Device Port (XDP) of Super Hybrid Ports:
A DPT and SLT can be connected to one super hybrid port (TR: SLT, HL: DPT). In this case,
the SLT port (TR) of the super hybrid port can be used as an XDP port to connect an SLT as
a sub telephone. There are two modes for the XDP port as follows:
Mode
Parallel Mode
XDP Mode
Conditions
• Automatic Detection on Super Hybrid Port
A DPT, APT, or SLT can be connected to a super hybrid port without programming.
• A DSS Console or a VPS (Panasonic KX-TVS/TVP series [DPT (Digital) Integration]) can
also be connected with an SLT in XDP mode.
• APT and SLT in Parallel Mode
An APT and an SLT can also be connected to a super hybrid port and used in parallel
mode.
• Wireless XDP Parallel Mode
A DWX can be used in parallel mode with a wired telephone.
(
• DSS Console and Pared Telephone Assignment
When a DSS Console is connected, a pared extension must be assigned through system
programming (
242 Feature Guide
DPT Port: DPT, DSS Console, or Panasonic VPS (KX-TVS/TVP series [DPT
(Digital) Integration]) can be connected.
SLT Port: SLT or KX-TVS/TVP series (DTMF Integration) can be connected.
Super Hybrid Port: DPT, APT, DSS Console, KX-TVS/TVP series, or SLT can be
connected.
The DPT and SLT have the same extension number so that they
can act as one extension. They use the main telephone's (DPT's)
extension data (e.g., extension number, COS).
( 1.9.9 Parallelled Telephone)
The DPT and SLT have different extension numbers so that
they can act as completely different extensions. To use XDP
mode, XDP mode must be enabled (on) the port through system
programming (
1.22.5 Wireless XDP Parallel Mode)
Console and Paired Telephone Assignment).
Description
XDP Assignment).