Panasonic KX-TDA100 Features Manual page 186
Hybrid ip pbx
Hide thumbs
Also See for KX-TDA100:
- Programming manual (912 pages) ,
- Pc programming manual (854 pages) ,
- Features manual (776 pages)
Table of Contents
Advertisement
1.21 Voice Mail Features
System Explanation
1.
Service Mode Assignment
Assign the service mode, VM service or AA service, to the VM (DTMF) group to
correspond with the assignment of the VPS.
2.
DTMF Command Assignment
Assign the DTMF command to suit the VPS settings.
Switching to VM
Switching to AA
Recording message
Listening message
Note: H = Mailbox Number
3.
VM Service
a)
b)
186
Feature Guide
FWD to a Mailbox of the VPS
The PBX sends a mailbox number of the corresponding extension to the VPS when
a call is forwarded from an extension to the VPS. Therefore the caller can leave a
message for the called extension without knowing the mailbox number.
[FWD to the VPS Sequence Selection]
If an extension user sets FWD to the VPS, any incoming call will be forwarded to the
VPS.
It is also possible to send the AA command, even in the VM service mode, when calls
are forwarded so that the caller can be directed to an extension rather than a mailbox.
This can be performed by selecting "AA" through system programming.
Parameter
Answer by
Switching to VM command +
Mailbox
Recording message command
(Default)
(#6 + H [H = Mailbox No.])
AA
Switching to AA command (#8) Switching to AA command (#8)
None
(DTMF commands are not sent. Work with default of the VPS.)
Intercept Routing to a Mailbox of the VPS
The PBX sends a mailbox number of the corresponding extension to the VPS when
a trunk call is intercepted from an extension to the VPS. Therefore the caller can
leave a message for the called extension without knowing the mailbox number.
[Intercept Routing to the VPS Sequence Selection]
If an extension user sets Intercept Routing to the VPS, the intercepted trunk calls will
be redirected to the VPS.
It is also possible to send the AA command, even in the VM service mode, when calls
are intercepted so that the caller can be directed to an extension rather than a
mailbox. This can be performed by selecting "AA" through system programming.
Command (Default)
#6
#8
H
H
Transmitted Command
In AA Service Mode
In VM Service Mode
Recording message command
(H [H = Mailbox No.])
Advertisement
Table of Contents
