Panasonic KX-TDA100 Features Manual page 24

1.1 Incoming Call Features
[Programming Example of MSN Table for ISDN BRI Port 1]
A table can be programmed for each ISDN-BRI port. Each BRI port has 10 MSN locations.
Locat
ion
01
02
:
10
*: The time mode (day/lunch/break/night) of the programmed tenant is applied to the MSN.
Explanation:
If the MSN "123-4567" is received from BRI port 1:
1. Checks the number in the table.
2. Checks the time mode.
Conditions
• To use the MSN service, "MSN" must be assigned for a trunk port as the distribution
method (
• MSN Modification
It is possible to modify a received MSN to make it shorter, which may be convenient when
programming the MSN table. Modification method (removed digit/added number) can be
programmed on a trunk port basis.
[Modification Example]
Removed digit: 6
Added number: 10
Received MSN: 87654321
• When using point-to-multipoint configuration with a BRI, do not connect another ISDN
terminal device in parallel with the PBX. As only two channels can be used at one time
with the BRI, the other ISDN terminal device may monopolise both channels.
24 Feature Guide
Tena
MSN nt
Day
No.*
123- Enab
1
4567 le
123- Enab
3
2468 le
: : :
: : :
Matches the number in location 01.
In Day mode: CLI is enabled. Route to CLI destination.
In Lunch mode: CLI is disabled. Route to MSN destination, extension 100.
BRI DIL/DID/MSN Selection).
CLI
Lunc Brea Nigh
Day
h k t
Disa Enab Disa
101
ble le ble
Disa Disa Disa
102
ble ble ble
: : :
: : :
Modified MSN: 876543 21 = 1021
1) Remove the first
6 digits.
MSN Destination
Lun Brea Nigh
ch k t
100 101 100
100 102 100
: : : :
: : : :
2) Add "10".
MSN
Name
A
Company
C
Company
:
: