Panasonic KX-TDA100 Features Manual page 189

[Performance of Pressing the MESSAGE Button]
In AA Service Mode
Switching to VM command +
Listening message command
(#6 + H [H = Mailbox No.])
[Example]
PBX
Pressing the
MESSAGE
button
Extn. 102
4.
AA Service
If the VPS transfers the call using the AA service, the PBX will inform the VPS of the
status of the called destination with the preprogrammed DTMF status signal so that the
VPS can confirm the status of the extension without listening to the system tones (e.g.,
ringback tone).
Assign the DTMF status signal to suit the VPS settings.
[The DTMF Status Signal and Condition]
Status
RBT (ringback
tone)
BT (busy tone)
ROT (reorder tone) The dialled number is invalid.
DND (DND tone)
Answer
FWD VM RBT
(FWD to Voice Mail
ringback tone)
FWD VM BT (FWD
to Voice Mail busy
tone)
Transmitted Command
In VM Service Mode
Listening message command
( H [H = Mailbox No.])
Sent "#6" + " ", "102".
Switching to VM command
VPS (In AA
service mode)
Mailbox for
Extn. 102
Condition
The PBX is ringing the corresponding
extension.
The called extension is busy.
The called extension has set DND.
The called extension has answered the
call.
The called extension has set FWD to
VPS and the PBX is calling another port
of the VPS.
The called extension has set FWD to
VPS and all ports of the VPS are busy.
1.21 Voice Mail Features
Listening message
command, mailbox number
Default Command
1
2
3
4
5
6
7
Feature Guide 189