Flashing the hookswitch
Mode 1
Going on-hook
Flashing the hookswitch
Mode 2
Hold Feature No.
(Default)
Going on-hook
Flashing the hookswitch
Mode 3
Hold Feature No.
Going on-hook
Flashing the hookswitch
Mode 4
Hold Feature No.
Going on-hook
If the following occur frequently with an SLT, choose "Mode 2", "Mode 3", or "Mode 4".
a)
Nobody answers when a call is received.
b)
Busy tone is heard even though nobody is using the trunk.
If a call is not terminated after going on-hook, the above cases occur. To avoid these
problems, choose "Mode 2", "Mode 3", or "Mode 4". Every call will be terminated unless
the Hold feature number is entered after flashing the hookswitch in Mode 2, Mode 3, and
Mode 4.
Hold
Transfer to Trunk
Flashing the hookswitch
+
Trunk Access No.
Flashing the hookswitch
+
Trunk Access No.
+
Flashing the hookswitch
+
Hold Feature No.
+
Trunk Access No.
Flashing the hookswitch
+
Hold Feature No.
+
Trunk Access No.
1.11 Holding Features
Transfer to Extension
Flashing the hookswitch
+
Extension No.
Flashing the hookswitch
+
Extension No.
Flashing the hookswitch
+
Extension No.
+
Flashing the hookswitch
+
Hold Feature No.
+
Extension No.
Feature Guide
+
+
+
+
+
121