Panasonic KX-TDA100 Features Manual page 15

2.
Distribution Feature
One of the following features can be assigned to each trunk port:
Feature
Direct In Line
(DIL)
Direct Inward
Dialling (DID)
Direct Dialling
Inward (DDI)
Multiple
Subscriber
Number (MSN)
Ringing Service
3.
Destination Change with the Caller's Identification Number
The Calling Line Identification (CLI) Distribution feature works in conjunction with the DIL/
DID/DDI/MSN features
Feature
Calling Line
Identification
(CLI) Distribution
4.
Available Distribution Feature for Each Optional Trunk Card Type
Feature
Trunk
Card
Type
Channel Type
LCOT
T1
TIE (E & M)
E1 E & M-C
E & M-P
E & M-C
E&M
E & M-P
BRI
PRI
Note: : Enable (default),
Description
Directs a call to a preprogrammed single
destination (e.g., Operator).
Directs a call with a DID number from a DID
line to a preprogrammed destination.
Directs a call with a DDI number from an ISDN
line to a preprogrammed destination.
Directs a call with an MSN from an ISDN line to
a preprogrammed destination.
Description
Directs a call to a CLI destination if the caller's
identification number has been assigned to the
Caller ID Table.
DIL
L-CO
G-CO
DID
DR2
CO
CO
: Enable,
1.1 Incoming Call Features
DID DDI MSN
: Disable
Details in
• Direct In Line
(DIL)
• Direct Inward
Dialling (DID)/
Direct Dialling
Inward (DDI)
• Multiple
Subscriber
Number (MSN)
Ringing Service
Details in
• Calling Line
Identification
(CLI) Distribution
Feature Guide 15