ABB i-bus KNX Product Manual page 12

®

i-bus KNX
a. Select the first option to integrate a physical EnOcean device (already selected
by default).
b. Check the Add Chip Id automatically check box.
c. Click on Discover Device button.
d. Press the Teach-in/Learn button of the Room Operating Panel. Device family and
EnOcean device will be selected automatically.
e. Click on Add Device Node button (the window will be closed).
3. Select the communication objects to be used in the node tree and other parameters in
the Gateway mapping tab. This step can be omitted if working with the default objects
and parameters.
4. Move to the Remote EnOcean Teach-in/Learning tab.
a. Click on the Download Parameters button (a message window will pop-up
indicating process progress).
5. Close the plugin (changes will be saved automatically).
6. Use ETS to setup proper KNX group addresses for each communication object and also
proper KNX physical address for KNX/EnOcean Gateway.
7. Download current KNX configuration to the gateway as with any other KNX product.
8. The EnOcean device (the Room Operating Panel in this case) and the KNX/EnOcean
Gateway are linked and ready to be used together with the KNX installation.
ABB STOTZ-KONTAKT GmbH
Eppelheimer Straße 82, 69123 Heidelberg, Germany
 +49 (0) 6221 701 607
 +49 (0) 6221 701 724
EG/A 32.2.1
www.abb.com/knx
Technische Helpline / Technical Support
 +49 (0) 6221 701 434 E-Mail: knx.helpline@de.abb.com
User's manual r1.5 eng
11 / 47