Adding / Erasing Enocean Devices From Ets - ABB i-bus KNX Product Manual

®

i-bus KNX

5.1.1 Adding / Erasing EnOcean devices from ETS

The Add Device Node button adds new EnOcean devices to be simulated or integrated into
KNX. When clicking on the Add Device Node button, a new window pops-up (see
KNX/EnOcean Gateway role: Select one of the radio buttons to get integration from
1
KNX to EnOcean or from EnOcean to KNX.
The KNX/EnOcean integrates an existing EnOcean device to KNX: Adds a
new physical EnOcean device to the current configuration.
The KNX/EnOcean simulates an EnOcean device: Adds a new simulated
EnOcean device. An EnOcean device is simulated from KNX (e.g. An EnOcean
window contact could be simulated by using a KNX binary input contact).
Discover device: Click on the Discover device button and on the Teach-in/learning
2
button of your EnOcean device. This will automatically select your device from the
ones in the list
automatically, please check the Add Chip ID automatlically check box.
3
Choose a family device: Select the group from the list that owns the EnOcean
device to be integrated to find the proper device faster and in an easy way.
4
Choose the EnOcean device: Select the EnOcean device to be integrated from the
list.
5
Add device: Adds the selected EnOcean device.
6
Cancel: Cancel the process.
2
In some cases, the application is not capable of establishing a one-to-one relation. In these cases, user only has to
decide which is the precise device, but doesn't have to look for the whole catalogue, as a preselecting is done by the
plugin.
3
This is not available for the rocker buttons and the AC devices. In these cases you will need to use the standard
teach-in/learn process in the Remote EnOcean Teach-in tab of this same plugin.
ABB STOTZ-KONTAKT GmbH
Eppelheimer Straße 82, 69123 Heidelberg, Germany
 +49 (0) 6221 701 607
 +49 (0) 6221 701 724
EG/A 32.2.1
1
Figure 5.5 Add device pop up screen
2
and will add the ChipID information
www.abb.com/knx
Technische Helpline / Technical Support
 +49 (0) 6221 701 434 E-Mail: knx.helpline@de.abb.com
3
5
3
. If you want to add the Chip ID
User's manual r1.5 eng
).
Figure 5.5
2
4
6
17 / 47