®
i-bus
KNX
Remember that you can only use IKE files provided by ABB.
Once you have customized device parameters and communication objects, it is time to import
EnOcean device chip information to establish proper communication between our
KNX/EnOcean Gateway device and the EnOcean devices.
KNX/EnOcean Gateway offers two different modalities to Learn/Teach-inEnOcean devices. You
can program them by pressing the Teach-in button on the device itself (see section 6) or you
can use the remote option of our plugin.
In case you want to Teach/Learn EnOcean devices manually, you just have to close the
KNX/EnOcean plugin and download your configuration as usual from ETS. On the other hand, if
you want to carry out the Teach-in/Learning process remotely, please go to the Remote
EnOcean Teach-in/Learning tab (see Figure 5.12).
1
ABB STOTZ-KONTAKT GmbH
Eppelheimer Straße 82, 69123 Heidelberg, Germany
+49 (0) 6221 701 607
EG/A 32.2.1
Figure 5.11 Importing new catalogue
2
Figure 5.12 Remote EnOcean Teach-in/Learning screen
+49 (0) 6221 701 724
www.abb.com/knx
Technische Helpline / Technical Support
+49 (0) 6221 701 434 E-Mail: knx.helpline@de.abb.com
User's manual r1.5 eng
3
4
22 / 47