Fujitsu 2737 User Manual page 139

6
Remove the handle from the front door.
To reverse the orientation of the handle, remove it from the front door.
・ To remove the handle, remove the tapping screws, which are 13 mm and 25 mm long.
Note: The decorative panel is a part separate from the handle body. Be careful because it may
fall off when the tapping screws are removed.

Be careful not to lose the parts and screws removed here. They will be used later.
Decorative
panel
Handle body
13-mm-long tapping screws
Rotation control member
Flat washer
13-mm-long tapping screws
25-mm-long tapping screws
4 Handling the Rack after Installation
E
139