Fujitsu 2737 User Manual page 154

3
Confirm that the heights of the left and right square holes into which the
hooks were inserted are the same.

4.4.3 Mounting the table
1
Secure the table to the M6 cage nuts that were attached in step 2 according
to "4.4.1 Inserting cage nuts", by applying M6 screws.
M6 cage nut
Hook


154
Since the table is only provisionally mounted, refrain from placing any load on it.
Table
M6 screws
Start work after confirming that rear brackets L and R will not fall down when the
table is placed on them.
When mounting the table provisionally, ensure that the table is securely mounted
with the front hook fully inserted in the relevant square hole. Also, ensure that the
rear part of the table is securely mounted on rear brackets L and R.
Do not stop supporting the table with your hand until the table is securely fixed in
position.
Rear bracket L
Rear bracket R