Fujitsu 2737 User Manual page 149

7
Install the handle.
・ Move the handle to the other side, and then secure the handle, the lock bracket, and the
rotation control member using the M6 hexagon bolt with flange and tapping screws.
 Install the rotation control member with the gear rotated 90 degrees from its
original orientation. Be careful not to install it in the wrong orientation.
fixing handle in position
Rotation control member
Lock bracket
M6 hexagon bolt with flange
8
Install the door-side hinges and the handle hole cover.
・ Install the door-side hinges with the M5 hexagon socket bolts.
・ Install the handle hole cover with the M4 hexagon nuts with flange.
 Push the door-side hinge straight into the metal plate of the door.
M5 hexagon socket bolt
Door-side hinge
Resins for
Tapping screws
Firmly push top and side of
door hinge straight into metal
plate of door
Handle hole cover
M4 hexagon nuts with flange
Grip
Handle body
Tapping screw
Changing gear orientation of rotation
control member
4 Handling the Rack after Installation
Rotate by
90 degrees
149
E