Connecting Racks - Fujitsu 2737 User Manual

3.5

Connecting Racks

To use additional expansion racks, connect additional racks to the existing rack (base rack or
expansion rack ).
Warning
Caution
■ Confirming components
Confirm that all components of the connection kit that need to be supplied with an expansion rack
have been delivered (see the table below).
Horizontal shield rubber jointing
Vertical shield rubber jointing strip
Vertical shield rubber jointing strip
Also, prepare the necessary tools:
・ Phillips screwdrivers (No. 2 and No. 3 bits)
・ Hexagon wrench (M12 retaining screws for the top cover: Socket size 8)
・ Spanner or box wrench (M12 screws for upper connection: Socket size 19)
Also, prepare a stepladder because some of the work will need to be performed at height.
122
・ Before connecting racks, turn off the power to the server and peripherals and
disconnect the power cables from the outlet.
Otherwise, there may be electric shock or failure of the equipment.
・ To prevent injury, ensure that at least two persons perform the rack connection
work.
Otherwise, injury may result.
・ You may get on a stepladder when working on the upper part of the rack.
Be careful not to fall from the stepladder.
・ Do not put your foot on the racks when connecting racks.
Component name
Lower mounting fixture
Upper mounting fixture
strip
1
2
M6 core spring nut
M6 flat head screw
M12 hexagon bolt
Quantity Remarks
2
2
1 Length: 880 mm
2 Length: 1,000 mm
Length
2 Model 2737: 650 mm
Model 2742/2642: 860 mm
8 For lower connection
8 For lower connection
4 For upper connection