Fujitsu 2737 User Manual page 150

9
Install the rear door.
・ With the rear door open to about 90 degrees, slide it sideways to insert the door-side hinges
(pins) into the rack-side hinges.
Note: When installing or removing the door, be careful not to get your fingers caught in the


This completes the procedure for changing the position of the rotation axis of the rear door.
150
gap between the door and the rack.
The rear door may be hard to install because the notches for the hinges on the
door are bent to control the opening and closing angle.
Confirm that both the upper and lower door-side hinges (pins) are definitely
inserted in the rack-side hinges.
Bend for controlling
opening and closing angle
Rack-side hinge
Notch for hinge
Door-side hinge