Setting/Clearing Method Of Password When It Is Required For Protection; Password Setting Method - Toshiba TOSVERT VF-AS3 Instruction Manual

Title
F735
F736
F737
F738
F739
4
*1 The setting of <F700>="2" and "4" is valid after reset (turning off power) for RS485 communica-
tion.
4
*2 Enabled when run command is input from the operation panel.
*3 After setting <F737>. turn on the power again. The setting is valid after the power is turned on
6
again.
*4 The setting of <738>="9999" is valid after reset (turning off power) for communication.
■ Selecting a setting value
In [Standard mode], if you lock the frequency setting on the operation panel (<FC>, <FPId>, Preset
speed), set <F730: Panel frequency setting lockout> to "1".
You cannot lock the setting with <F700>.
9

■ Setting/clearing method of password when it is required for protection

1) Password setting method

Parameters other than <F700>, <F738>, and <F739> cannot be changed when <F700> is set
to "1" to "4".
When <F738> or <F739> is "0", a password has not been set. You can set a new password.
When <F738> or <F739> is "9999", a password has already been set.
If not set, select and register a number from "1" to "9998" for <F738> as a password. Do not
forget your password as it is required to release the lock.
Important
6. [Advanced] How to use parameters
Parameter name
Panel reset lockout
CMOd/FMOd change
lockout during run
*3
Panel keys lockout
*4
Password setting
Password verification
• The lock cannot be released if you forget the password. Do not forget this password as we
cannot retrieve it.
Adjustment range
0: Unlocked
1: Locked
0: Unlocked
1: Locked
0: Unlocked
1: Locked
2: Locked only extension panel
3: Locked only operation panel
0: Disabled
1 - 9998
9999: Password was set
0: non-setting
1 - 9998
9999: Password was set
6-164
E6582062
Default setting
0
1
0
0
0