Screen Display Of [Setting Mode]; Screen Display Of [Easy Mode] - Toshiba TOSVERT VF-AS3 Instruction Manual

■ Screen display of [Setting mode]

This is a display mode to set parameters.
(1)
(2)
1. History function
2. Direct access
3. Guidance function
(3)
4. Basic parameters
5. Extended parameters(F - - -)
Top View
3
(4)
(1) From the operation status to the current time, this mode has the same display as [Standard
mode].
(2) The current display mode [Setting mode] is displayed.
(3) The setting items are displayed. One screen can display up to five items.
Select an item with the touch wheel and press the [OK] key. Then the setting screen is displayed.
<Setting screen of basic parameter>
"Left end": Title
"Middle": Parameter name
"Right end": Setting value
(4) The functions assigned to the [F1] - [F4] keys are displayed.
9
For details, refer to [3. 1. 1].

■ Screen display of [Easy mode]

This is a display mode to set parameters easily.
It is displayed in the following cases.
• When "Easy" of the [F1] - [F3] keys is pressed in [Standard mode] and [Monitor mode]
• When [Easy mode] is set in <PSEL: Parameter mode select>
Only the parameters set in <F751: Easy setting 1> - <F782: Easy setting 32>. For details, refer to [5.
1. 8].
3. [Basic operation] Operation panel and screen display
STOP 0.0Hz
Parameter Setup Mode
Top screen of [Setting mode]
STOP
: Run command select
CMOd
: Frequency command 1
FMOd
: Acceleration time 1
ACC
: Deceleration time 1
dEC
: Upper limit frequency
UL
Top View
12:37
: Inverter OL characteristic
AUL
: Automatic Acc/Dec
AU1
: Torque boost macro
Au2
: Run command select
CMOd
: Frequency command 1
FMOd
Monitor
Setting screen of basic parameters
0.0Hz
12:38
Easy parameters
10.0s
10.0s
60.0Hz
Monitor
3-8
E6582062
STOP 0.0Hz
Basic parameters
1
10
12:43
0
0
0
1
10