Switching To The Information Level (Operator Menu) - ABB PositionMaster EDP300 Operating Instruction

Symbol Operating mode
Manual setpoint, fixed control
The valve is adjusted manually within the stroke
range using the
1. Press and hold the relevant operating button for
the desired direction.
2. Additionally, press
switched to high-speed mode.
Moving the actuator manually
The valve is adjusted manually within the valve
range using the
position indicator shows the position in ° for the
purpose of checking the mounting conditions.
1. Press and hold the relevant operating button for
the desired direction.
2. Additionally, press
switched to high-speed mode.
Setpoint via HART, adaptive control
Setpoint via HART, fixed control
Activated binary input, adaptive control
Activated binary input, fixed control
or direction buttons.
if the device is to be
CAUTION – Risk of crushing!
Configured stroke limit positions
and stroke times are not effective in
manual mode. When the actuator
moves, there is a risk of crushing.
You must make sure that no-one is
present within the actuator's
working range.
or direction buttons. The
if the device is to be
CAUTION – Risk of crushing!
If air escapes due to a leakage, the
position will not be readjusted.
Configured stroke limit positions
and stroke times are not effective in
manual mode. When the actuator
moves, there is a risk of crushing.
You must make sure that no-one is
present within the actuator's
working range.
Descriptions of message symbols
Symbol Message symbol
Universal input activated
Diagnostic message pending
Error pending
Maintenance message pending
8.2.2

Switching to the information level (Operator Menu)

On the information level, the operator menu can be used to
display diagnostic information and choose which operator
pages to display.
Process display
1. Use to switch to the information level.
Operator Menu
Diagnostics
Operator Page 1
Signal View
Back Select
2. Use or to select a submenu.
3. Use to confirm your selection.
PositionMaster EDP300 | OI/EDP300-EN 25