Mounting On Part-Turn Actuators - ABB PositionMaster EDP300 Operating Instruction

Integral mounting on control valves
Fig. 11
1 Shims | 2 Screws | 3 O-ring | 4 Lever
Integral mounting on control valves using adapter plate
Fig. 12
1 O-ring | 2 Adapter plate | 3 Adapter
14 OI/EDP300-EN | PositionMaster EDP300
4.2.3

Mounting on part-turn actuators

For mounting on part-turn actuators in accordance with VDI /
VDE 3845, the following mounting kit is available:
Fig. 13
— Adapter (1) with spring (5)
— Four screws M6 (4), four spring washers (3), and four shims
(2) for attaching the mounting bracket (6) to the positioner
— Four screws M5 (7), four spring washers (8), and four shims
(9) for attaching the mounting bracket to the actuator
Required tools:
— Wrench, size 8 / 10
— Allen key, size 3