Toshiba Tosvert VF-S15 Instruction Manual page 65

(3) Coast stop
Assign parameters as described below in case of
Coast stop. Inverter will display off at Coast stop.
1) Assign "6 (ST)" to an input terminal. Set parameter
=. Open the ST-CC for coast stop(see the
status described on the right).
2) Assign "96 (FRR)" to an input terminal.
Coast stop is done by shorting FRR and CC.
3
Motor
speed
F-CC
ST-CC
C-6
E6582175
Coast stop
ON
OFF
ON
OFF