Connecting/Disconnecting Patient Cables
Connecting the SpO
Patient Cable
2
To connect the SpO
patient cable:
2
1. Hold the connector with the flat side up, as shown in Figure 10-4.
2. Insert the connector into the receptacle and push until the blue portion of
the connector is no longer visible.
Figure 10-4 Connecting the SpO
Patient Cable
2
Disconnecting the SpO
Patient Cable
2
To disconnect the SpO
patient cable, gently pull it out of the SpO
connector.
2
2
10
M3500B HeartStart XLT Defibrillator/Monitor
10-5