Preparation - Philips HEARTSTART XLT M3500B Instructions For Use Manual

NOTE
M3500B HeartStart XLT Defibrillator/Monitor

Preparation

In preparation for defibrillation:
1. Apply multifunction defib electrode pads as directed on the package. Use
either the anterior-anterior or anterior-posterior electrode placement, as
appropriate.
2. Connect the pads to the pads patient cable, as shown in Figure 6-2.
3. If needed, insert a Data Card (as described in "Using a Data Card" on 2-
11).
4. Press On.
5. Enter Manual Mode, if AED Mode is active.
Figure 6-2 Connecting Pads to the Patient Cable
Defibrillation is always performed through pads. However, during defibrilla-
tion, you may choose to monitor ECG using an alternate ECG source (3- or 5-
lead monitoring electrodes).
Preparation
6
6-3