Philips HEARTSTART XLT M3500B Instructions For Use Manual page 49

Monitoring Rhythm
If Rhythm Monitoring detects a shockable rhythm, you are prompted as fol-
lows:
Figure 3-13 Shockable Rhythm
Check Patient
If No Pulse
Press ANALYZE
Shocks: 3
00:00:55
ANALYZE
PAUSE
This prompt is repeated periodically, as configured, until or is
3
pressed. If you press , the defibrillation process starts again.
If you press rhythm monitoring is suspended for the duration of the
,
pause. is used when administering CPR, as noted earlier. It may also be
useful when performing medical procedures or encountering artifact during
patient transport. Active SpO and heart rate alarms are suspended during the
2
pause duration, as well.
Press to restore rhythm monitoring. Active SpO and heart rate alarms
2
are also restored.
M3500B HeartStart XLT Defibrillator/Monitor 3-15