Preparation - Philips HEARTSTART XLT M3500B Instructions For Use Manual

M3500B HeartStart XLT Defibrillator/Monitor

Preparation

If the patient is:
unresponsive
not breathing
pulseless
Then:
1. Apply multifunction defib electrode pads to the patient, as directed on the
package. Use the anterior-anterior electrode placement.
2. Connect the pads to the pads patient cable, as shown in Figure 3-2.
3. If needed, insert a Data Card (as described in "Using a Data Card" on 2-
11).
Figure 3-2 Connecting Pads to the Patient Cable
Preparation
3
3-5