Configurable Parameters - Philips HEARTSTART XLT M3500B Instructions For Use Manual

Configuring the HeartStart XLT
10-8
To turn the HeartStart XLT on in Configuration Mode:
1. If the device is already on, press Off.
2. While holding down softkeys 4 & 5, press 1.
The configuration menu appears as shown in Figure 10-7. The menu lists the
categories of settings that may be configured.
Figure 10-7 Configuration Menu
MAIN
General Settings
AED Settings
Manual Settings
ECG Filter Settings
Save Settings to Data Card
Load Settings from Data Card
Print All Settings
Turn Off To Exit Configuration

Configurable Parameters

The following tables show the configurable parameters for each category of
settings. A description of each parameter is provided, along with the possible
choices. Default settings are in bold.
ENTER
Setting Up and Configuring the HeartStart XLT