Philips HEARTSTART XLT M3500B Instructions For Use Manual page 110

Configuring the HeartStart XLT
NOTE
NOTE
10-12
Table 10-2 AED Settings: (Continued)
Parameter
Defines the duration of the Pause time (in sec-
onds) when
since the last shock is greater than the
If is set to Off, the following configuration choice appears:
Defines the duration of the pause time (in sec-
onds), when
The following two configuration choices are always available regardless of the
setting.
Turns on ECG monitoring.
Turns on SpO
configurable item if the SpO
chased.
* If is set to
and appears as a configurable parameter. If
the
appear as configurable parameters in place of
If is set to
<
ured to either or
Description
is pressed and the time
setting - typically when
is pressed (when
is set to Off).
monitoring. Only listed as a
2
, the Pause Timer is used during the Pause state
or the are used during the Pause state and
, the setting for the
. Also, the
.
Setting Up and Configuring the HeartStart XLT
30, 60, 120,
180
30, 60, 120,
180
On, Off
On, Off
option was pur-
2
is set to
.
can not be config-
Setting
Choices
, either
must be <