Pbx Configuration-[9-3] Private Network-Network Operator (Voip) - Panasonic KX-NS1000 Pc Programming Manual

17.3 PBX Configuration—[9-3] Private Network—Network Operator (VoIP)
17.3 PBX Configuration—[9-3] Private
Network—Network Operator (VoIP)
This screen allows network operators to be programmed. A network operator is an extension at a remote PBX
that will monitor other PBX extensions using Network Direct Station Selection (NDSS). The settings on this
screen should be programmed at the PBX that is to be monitored (
Centralized Operator Feature—Network PBX ID 2–8). Up to 8 network operators can be programmed.
Network Operator Extension No.
Specifies the number of an extension at the monitor PBX (the PBX whose
for Centralized Operator Feature—Network PBX ID is set to 1 in 17.2 PBX Configuration—[9-2] Private
Network—Network Data Transmission). Any extension at the monitor PBX can be specified here.
Default
Not stored
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
17.3 PBX Configuration—[9-3] Private Network—Network Operator (VoIP)
Programming Manual References
17.2 PBX Configuration—[9-2] Private Network—Network Data Transmission—
for Centralized Operator Feature—Network PBX ID
Feature Manual References
15.1.14 Private Network Features—NDSS (Network Direct Station Selection)
Site
Specifies the PBX in the One-look network where the V-IPGW16 card is installed for sending extension status
data.
Default
Undefined
Value Range
Site name in the One-look network
Maintenance Console Location
17.3 PBX Configuration—[9-3] Private Network—Network Operator (VoIP)
876 PC Programming Manual
Network Data Transmission for
Network Data Transmission
Network Data Transmission
Document Version 2016-03