Panasonic KX-NS1000 Pc Programming Manual page 506

10.3 PBX Configuration—[2-3] System—Timers & Counters
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Manual References
4.1.18 Conference
Unattended Conference—Disconnect Timer
Specifies the length of time until an Unattended Conference is disconnected after the parties involved in the
conference receive a warning tone but the conference originator does not return to the conference.
Default
15
Value Range
0–240 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Manual References
4.1.18 Conference
Miscellaneous
Caller ID—Waiting to receive
Specifies the length of time that the PBX waits to receive Caller ID from an analog CO line. If the Caller ID is
received through an analog CO line card on which no Caller ID card is mounted or through a port to which
Caller ID Detection is disabled, this timer is not applicable.
Default
5
Value Range
0–15 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Programming Manual References
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
Feature Manual References
4.1.3 Caller ID
506 PC Programming Manual Document Version 2016-03