Panasonic KX-NS1000 Pc Programming Manual page 726

12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Forced Automatic Answer
Specifies whether the extension automatically answers all incoming calls (both intercom and CO line calls)
without going off-hook, regardless of the Hands-free Answerback setting.
Default
Off
Value Range
Off, On
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Flexible Button Programming Mode
Specifies whether the extension user can modify all flexible buttons without limitation, or only the One-touch
Dialing buttons. When the mode is set to One-touch Dial, there is no need to enter "2" before the number
when customizing a One-touch Dialing button.
Default
No Limitation
Value Range
No Limitation, One-touch Dial
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
ICM Tone
Selects the ring tone for incoming calls arriving at the INTERCOM button or PDN buttons. Note that the ring
tone specified here is applied to all PDN buttons on an extension.
Default
1
Value Range
IP-PT (except KX-NT265/KX-NT321): 1–30
KX-NT265/KX-NT321: 1–8 (Even if ring tone 9–30 is selected, ring tone 1 is heard.)
Other telephones: 1–8 (Even if ring tone 9–30 is selected, ring tone 2 is heard.)
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Display Lock
Locks or unlocks the Incoming Call Log display (i.e., specifies whether other extension users can see the
Incoming Call Log information at the extension).
726 PC Programming Manual Document Version 2016-03