Panasonic KX-NS1000 Pc Programming Manual page 368

9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
The smaller this number, the higher the quality of the transmitted sound.
Default
20 ms
Value Range
20 ms, 30 ms, 40 ms, 60 ms
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Manual References
10.1.17 IP-PT (IP Proprietary Telephone)
Announce Mode
Specifies if the extension's built-in ANNOUNCE feature is enabled. A KX-NT265, KX-NT300 series, or
KX-NT500 series phone in a remote location with ANNOUNCE enabled can provide the PBX's IP Address
information to other terminals in the remote location in place of manually programming the PBX's IP address
at each terminal.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Manual References
10.1.17 IP-PT (IP Proprietary Telephone)
Voice
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Extension Number
Specifies the extension number of the port.
Note
This setting cannot be changed on this screen until the port has been assigned as a secondary port using
the Set Secondary command. See Setting Secondary Ports below for details.
Default
Starting at 101
368 PC Programming Manual Document Version 2016-03