System Control-Program Update-Download Program File - Panasonic KX-NS1000 Pc Programming Manual

5.1.1 System Control—Program Update—Download Program File
5.1.1 System Control—Program Update—Download Program File
Software updates for PBX hardware components can be downloaded to the PBXs in the One-look network.
Manual and automatic methods are available.
Program downloading can be performed only in On-line mode.
Note
•
If these operations are performed when logged in to a Slave unit, only the manual method can be used,
and files may only be acquired from a local PC or a USB memory device.
•
When using an FTP server with this feature, the program files to be downloaded to the KX-NS1000
PBX must be named on the FTP server in a specific way that includes the version number.
Example: "PNT300_xxx_xxx_xxx"
("xxx_xxx_xxx" is the version number.)
Manual
Using manual operations, the location of updated PBX software is specified and downloaded to the Master
unit, and then transferred to any Slave units.
To download program files manually
1.
In Location of program files, specify the location of the updated files from the Look in drop-down list.
The choices are as follows:
•
Local PC
Click Browse and specify the location of the updated program files stored on the PC logged in to Web
Maintenance Console.
•
USB Memory
If a USB memory device is inserted into the PBX, the contents of the following directory on the device
will be checked for updated files:
/private/meigroup/psn/ippbx/update
•
FTP Server
The PBX connects to the specified FTP server and checks for updated files. Specify an FTP server
from the FTP connection name drop-down list, and specify the number of attempts to connect to the
FTP server in No. of retries.
To specify a new FTP site, see 28.3.1 Network Service—[3-1] Client Feature—FTP.
•
Master Unit
The most recent versions of files previously downloaded to the Master unit are displayed.
•
NAS
Specify the location of the updated program files stored on a directory of the NAS to Web Maintenance
Console.
2.
Specify which PBX program files will be automatically downloaded by checking the boxes next to each
hardware item.
3.
For FTP Server only
Click Check to confirm the connection to the FTP server. If a connection is established, the Execute button
will become active.
4.
Click Execute, and then click OK on the confirmation message that appears. When the transfer is complete,
click OK.
Note
•
If downloading cannot be completed within 10 minutes (due to slow network speeds or other connection
problems), the download operation will be canceled.
•
The Master unit's FTP server function must be enabled for Slave units to download program files.
See 28.2.2 Network Service—[2-2] Server Feature—FTP.
78 PC Programming Manual Document Version 2016-03